AnasayfaKurumsalÜrünlerBelgelerİletişim

METEOROLOJİK CİHAZLAR_METEOROLOJİ HAVA İSTASYONU SENSÖRÜ METEOROLOJİK HAVA İSTASYONU RÜZGAR HIZI SENSÖRÜ METEOROLOJİK CİHAZLAR VERİ TAKİP-KONTROL SİSTEMLERİ_SERA KÜMES TAVUK ÇİFTLİĞİ ECZA DEPOSU SOĞUK ODA VERİ TAKİP-KONTROL SİSTEMLERİ SICAKLIK NEM_TERMOHIGROMETRELER SICAKLIK NEM BASINÇ_BASıNç ÖLçüM CIHAZLARı DİJİTAL MANOMETRE DİJİTAL BASINÇ ÖLÇÜM CİHAZLARI DİJİTAL MANOMETRELER BASINÇ HAVA, RÜZGAR HIZI VE YÖNÜ_HAVA HıZı VE YöNü ÖLçüM CIHAZLARı ANEMOMETRE METEOROLOJI HAVA, RÜZGAR HIZI VE YÖNÜ POZİSYON ÖLÇÜM SENSÖRLERİ_ENKODERLAR, POTANSIYOMETRELER, YAKLAşıM SENSöRLER POZİSYON ÖLÇÜM SENSÖRLERİ YAKLAŞIM SENSÖRLERİ_PROXİMİTY SWİTCH YAKLAŞIM İNDÜKTİF POZİSYON PNP NPN YAKLAŞIM SENSÖRLERİ PROSES KONTROL VE KAYIT CİHAZLARI_SıCAKLıK KONTROL CIHAZLARı PROSES KONTROL VE KAYIT CİHAZLARI DEBİ ÖLÇÜMÜ_AKış HıZı FLOW MIKTAR ÖLçüMü DEBİ ÖLÇÜMÜ MALZEME TEST_MALZEME SERTLIK KALITE TEST CIHAZı MALZEME TEST KUVVET ÖLÇÜM_DIJITAL DINAMOMETRELER KUVVET ÖLÇÜM ELEKTRİKSEL ÖLÇÜM_ELEKTRIK ÖLçüM CIHAZLARı ELEKTRİKSEL ÖLÇÜM ANALOG ÇıKışLı SENSöRLER_TRANSMİTTER SENSÖR ANALOG ÇIKIŞ DİJİTAL ÇIKIŞ Analog Çıkışlı Sensörler DC AKıM ÖLçüM TRANSMITTERLER_DC AKIM ÖLÇÜM SENSÖRÜ ANALOG ÇIKIŞLI DC Akım Ölçüm Transmitterler AC AKıM ÖLçüM TRANSMITTERLER_AC AKIM ÖLÇÜM SENSÖRÜ ANALOG ÇIKIŞLI AC Akım Ölçüm Transmitterler DC VOLTAJ ÖLçüM TRANSMITTERLER_DC VOLTAJ GERİLİM ÖLÇÜM SENSÖRÜ ANALOG ÇIKIŞLI DC Voltaj Ölçüm Transmitterler AC VOLTAJ ÖLçüM TRANSMITTERLER_AC VOLTAJ GERİLİM ÖLÇÜM SENSÖRÜ ANALOG ÇIKIŞLI AC Voltaj Ölçüm Transmitterler MANYETIK ALAN ÖLçER_MANYETIK ALAN ÖLçüM CIHAZı Manyetik Alan Ölçer MULTIMETRELER_DIJITAL ANALOG MULTIMETRELERI Multimetreler PENS AMPERMETRELER_DIJITAL ANALOG PENS MULTIMETRE Pens Ampermetreler MIKROOHMMETRE_MİKRO OHM ÖLÇÜM CİHAZI OHMMETRE MİKROOHMMETRE MİLİOHMMETRE MEGAOHMMETRE Mikroohmmetre Güç ANALIZöRLERI_POWER ANALYSER Güç Analizörleri OSILOSKOPLAR_DIJITAL VE ANALOG OSILOSKOPLAR Osiloskoplar HOLIDAY DETECTOR_HATA TAYIN CIHAZLARı Holiday Detector DIRENç KUTULARı_DİRENÇ KUTUSU REFERANS DİRENÇ KALİBRASYON DİRENCİ DEKAD KUTU Direnç Kutuları KALINLIK ÖLÇÜM_ULTRASONIK MALZEME KALıNLıK ÖLçER KALINLIK ÖLÇÜM GÜRÜLTÜ ÖLÇÜM_DESIBELMETRELER GÜRÜLTÜ ÖLÇÜM IŞIK ŞİDDETİ_LUXMETRELER IŞIK ŞİDDETİ GAZ ÖLÇÜM CİHAZLARI_GAZ ÖLçüM ANALIZ CIHAZLARı GAZ ÖLÇÜM CİHAZLARI TERAZİ VE BASKÜLLER_AğıRLıK ÖLçER TERAZİ VE BASKÜLLER KÜTLE VE KÜTLE SETLERİ_ETALON KüTLELER KÜTLE ve KÜTLE SETLERİ BOYUT_BOYUTSAL ÖLçME ALETLERI BOYUT TEST KABİNLERİ_ETÜV İNKÜBATÖR STERİLİZATÖR İKLİMLENDİRME KABİNİ SOĞUTMALI ÇALKALAMALI TEST KABİNLERİ NUMUNE SAKLAMA VE TAŞIMA KAPLARI_TERMOS AZOT TAşıMA NUMUNE SAKLAMA VE TAŞIMA KAPLARI TAKOMETRE-DEVİR ÖLÇER_DEVIR ÖLçüM CIHAZLARı TAKOMETRE-DEVİR ÖLÇER KRONOMETRELER_ZAMAN SAYAçLARı KRONOMETRELER İŞ SAĞLIĞI VE GÜVENLİĞİ_İSG ÖLçüM CIHAZLARı İŞ SAĞLIĞI VE GÜVENLİĞİ ANALİTİK ÖLÇÜM_PH ILETKENLIK öLçüM CIHAZLARı ANALİTİK ÖLÇÜM YOĞUNLUK-VİSKOZİTE_PİKNOMETRE VİSKOZİTE ÖLÇÜM YOĞUNLUK YOĞUNLUK-VİSKOZİTE ÇEŞİTLİ ÜRÜNLER_MENGENE LABORATUVAR MENGENESİ ÇEŞİTLİ ÖLÇÜM CİHAZLARI ÇEŞİTLİ ÜRÜNLER




ELEKTRİKSEL ÖLÇÜM > Mikroohmmetre >

AOIP MIKROOHMMETRE | KERN ELEKTRONIK
Mikroohmmetre
Mikroohmmetre
Marka : AOIP
AOIP MIKROOHMMETRE | KERN ELEKTRONIK
Özellikler

Resistance measurement

Range Resolution Accuracy at 90 days
(23°C ±1°C)
Measuring current Voltage drop
2 mΩ 0.1 μΩ 0.05% + 0.3 μΩ 10 A 20 mV
20 mΩ 1 μΩ 0.05% + 2 μΩ 10 A 200 mV
20 mΩ 1 μΩ 0.05% + 3 μΩ 1 A 20 mV
200 mΩ 10 μΩ 0.05% + 10 μΩ 10 A 2 V
200 mΩ 10 μΩ 0.05% + 20 μΩ 1 A 200 mV
200 mΩ 10 μΩ 0.05% + 30 μΩ 100 mA 20 mV
2 Ω 100 μΩ 0.05% + 100 μΩ 1 A 2 V
2 Ω 100 μΩ 0.03% + 200 μΩ 100 mA 200 mV
2 Ω 100 μΩ 0.03% + 300 μΩ 10 mA 20 mV
20 Ω 1 mΩ 0.03% + 1 mΩ 100 mA 2 V
20 Ω 1 mΩ 0.03% + 2 mΩ 10 mA 200 mV
20 Ω 1 mΩ 0.03% + 3 mΩ 1 mA 20 mV
200 Ω 10 mΩ 0.03% + 10 mΩ 10 mA 2 V
200 Ω 10 mΩ 0.03% + 20 mΩ 1 mA 200 mV
200 Ω 10 mΩ 0.03% + 30 mΩ 100 µA 20 mV
2 kΩ 100 mΩ 0.03% + 100 mΩ 1 mA 2 V
2 kΩ 100 mΩ 0.03% + 200 mΩ 100 µA 200 mV
20 kΩ 1 Ω 0.03% + 1 Ω 100 µA 2 V

Automatic or manual selection of measurement range
Accuracy given in % of reading + counts over 90 days at 23 ±1°C
Maximum capacity: 26,000 counts

Further features

Configurations 6 configurations available, to be modified if necessary with LOG OM software delivered in standard
Resistance types
  • Inductive resistances: Coils, transformers, motor windings...
  • Non-inductive resistances: Earth bonding, coating, contact resistances...
Measuring current
  • Internal or external source
  • DC current from 100 µA to 10 A
  • Continuous, pulsed or pulsed alternated
Measurement time < 1 s in direct current mode
< 1,5 s in pulse current mode
< 2 s in alternate current mode
Measurement trigger conditions Manual or automatic trigger from 2 measures/s to 1 measure/9h, allowing a single operator to be able to perform measurements
EMFs Automatic compensation of EMF parasites before each measurement for a greater accuracy
Temperature compensation Choice of metal temperature coefficient
Choice of ambient temperature (programmed or measured with external probe)
Temperature compensation at 20°C: Resolution: 0.1°C, accuracy: ±0.5°C
(R20 = Resistance compensated at ambient temperature equal to 20°C
Temperature coefficient beyond operating range < 10% accuracy/°C
Relative measurements Display L = R-R0 or L = 100 x (R-R0)/R0 in %
Where L: read value, R: measured value and R: reference value either recalled from memory or entered by the operator
Coil heating calculation Coil heating calculation according to ambient temperature, original coil resistance at ambient temperature, coil resistance once heated and coil material
Alarms 2 programmable thresholds with visual and sound signal and relay outputs
Outputs
  • Two relays (1 A / 220 VAC)
  • 1 analogue output 0 – 2.5 V (load >= 2.5 kΩ, resolution: 10 mV, accuracy: ±10 mV)
Calibration Digital calibration without internal adjustment

General specifications

Size 225 x 88 x 310 mm
Weight 2 to 3 kg depending on options
Display LCD 26,000 counts, 16 figures lighted, 11.5 mm high
Power supply 115 / 230 V (50 / 60 Hz)
Battery with internal charger(option) Type: 12 V battery pack
Battery life: 2 to 8 h according to use
Charging time: 14 h
Communication ports
  • RS 232 in standard
  • IEEE 488-2 in option

Allows programming, data management and unit calibration directly from a computer

Storage capacity 1,000 measurements with average, minimum and maximum value
Memory reading directly on the display or through digital and analogue interfaces

Environmental specifications

Reference range 23°C ±1°C (RH: 45 to 75% w/o condensing)
Operating reference range 0 to 50°C (RH: 20 to 80% w/o condensing)
Limit operating range -10°C to +50°C (RH: 10 to 80% w/o condensing)
Storage temperature limits -30°C to +55°C
(-15°C to +50°C for model with battery)
Protection IP IP40 according to EN60529
Maximum altitude 2,500 m

Safety specifications

Protections
  • Electronic protection for ‘voltage’ wires
  • Fuse protection for ‘current’ wires
  • Protection against ‘current’ circuit breaking during inductive resistance measurements
Class In accordance with EN 61010-1
Category III, pollution 2
Rated voltage 50 V
Chocks and vibrations EN61010-1
EMC conformity Immunity:
  • EN 50082-1/1992

Conducted and radiated emissions:

  • EN 55022, class B
  • Radiated: IEC 801-3/1984
  • Conducted: IEC 801-4/1988
  • Electrostatic discharges: IEC 801-2/1991
AOIP MIKROOHMMETRE | KERN ELEKTRONIK



E-Posta Abonemiz Olun     
Kampanyalarımızdan Habersiz Kalmayın...